Transitions

Transitions are a fundamental aspect of video editing that help blend scenes seamlessly, convey a change in time or location, or add stylistic effects to your projects. VEGAS Pro offers a wide range of transition effects that can elevate your video projects.

Adding transitions

Choose View | Window | Transitions to display or hide the Transitions window.

Use this window to choose and preview transition effects that you can use to control how a video event begins or ends, or to change the way one event flows into another.

At the top of the window you can see the available video effects organized into categories. In addition to categories such as Fades, Wipes or 3D Effects, there are three special categories:

• All plug-ins: All available plug-ins are listed here.

• Third party: Additionally installed third-party plug-ins are displayed here. If you select this category, an additional Filter drop-down menu will appear in the upper right corner, where you can filter the third-party plug-ins by provider.

• Favorites: All plug-ins that you have marked as favorites are listed here. You mark a plug-in as a favorite by clicking on the little star in front of the plug-in name .

The left pane lists each of the available transitions of the selected category. The thumbnail images in the right pane represent each of the existing presets for the selected effect. Hover your cursor over a preset to see an animated example.

Drag a transition preset to overlapping video events in the timeline to add a transition.

Adding transitions to events

1. Choose View | Window | Transitions to display the Transitions window.

2. Select a transition from the list on the left side of the window. The thumbnail images on the right side of the window represent each of the existing presets for the selected transition. Point to a preset to see an animated example.

3. After you've found the preset you want to use, drag it to the position where you want it to occur on the timeline.

   You can drop the transition at either end of an event, between two overlapping events, or between two adjacent events.

   The Video Event FX window is displayed to allow you to edit the transitions settings, and a Transition Properties button is displayed in the timeline to show you where the transition takes place. You can also click this icon to edit the transition's settings.

Adding a transition to all selected events

If you tend to use the same transitions often, you can save yourself some time by adding a transition to all selected events.

1. Select the events where you want to add the transition.

2. Choose View | Window | Transitions to display the Transitions window.

3. Select a transition from the list on the left side of the window. The thumbnail images on the right side of the window represent each of the existing presets for the selected transition. Point to a preset to see an animated example.

4. After you've found the preset you want to use, drag it to one of the selected events.

   The new transition replaces all existing transitions in the selected events.

   The Video Event FX window is displayed to allow you to edit the transitions settings, and a Transition Properties button is displayed in the timeline to show you where the transition takes place. You can also click this icon to edit the transition's settings.

Dropping on existing cuts, crossfades, or transitions

• If you drop the preset on an existing transition, only transitions within the selection will be changed. Cuts and crossfades are preserved.

• If you drop the preset on an existing crossfade, only crossfades and transitions within the selection will be changed. Cuts are preserved.

• If you drop the preset on an existing cut, all cuts, crossfades, and transitions within the selection will be changed.

Dropping on event edges

• If you drop the preset on a transition that is at the beginning or end of an event (but does not span two events), only single-event transitions that occur on the same end of the event within the selection will be changed.

• If you drop the preset on an event fade-in or -out, event fade-ins/outs and single-event transitions that occur on the same end of the event within the selection will be changed.

• If you drop the preset on an event edge with no fade, all other event edges, event fade-ins/outs, and single-event transitions that occur on the same end of the event within the selection will be changed.

NOTE To change the length of the transition for cuts that are converted to transitions, use the Cut-to-overlap conversion settings on the Editing tab of the Preferences dialog. For more information, see Editing Tab

Changing the speed/duration of a transition

After you've added a transition to an event, you can easily adjust its duration, which will change the speed at which the transition occurs.

Adjusting a transition at the beginning or end of an event

1. Hover over the edge of the transition until the fade cursor is displayed.

2. Drag the edge of the transition to set its new length:

   

Adjusting a transition between two events

Drag either of the events to change the amount of overlap between them. The transition length is updated to match the overlapping area:

Right-click a track header and choose Expand Track Layers from the shortcut menu to reveal the A roll, B roll, and transition roll. In this view, sequential clips alternate between the A and B rolls, and the overlapping area between events is represented by the transition roll.

Adding a transition progress envelope

Normally, a transition progresses from 0 to 100% in a linear fashion over the length of the transition. A transition progress envelope gives you complete control over a transition: you can hold, reverse, and repeat individual transitions.

1. Right-click a transition.

2. From the shortcut menu, choose Insert/Remove Envelope, and then choose Transition Progress from the submenu. An envelope is added to your transition.

3. Add points and adjust the fade curves as desired. For more information, see Adjusting envelopes

   In the following example, the transition starts, progresses to 50%, reverses direction, and then finishes.

   

Transition Progress with animation

*new since VEGAS Pro 22*

The Transition Progress envelope enables the user to control the rate of a transition over time and animate the progress so that it goes fast, slower, or even in reverse. This gives the user power to create custom transition behavior and includes Bèzier curve tools for complete control over the rate of change between animation points along the curve.

1. Add two video clips to the same track in your timeline and overlap them to create a crossfade.

2. Make the overlap at least a second long so that you can see the results more clearly.

3. In the Window Docking area, click the Transitions tab.

4. Drag a transition onto the crossfade area. Something simple like a Clock Wipe or Linear Wipe works well for experimentation.

5. In the timeline, click the transition’s Transition Properties button.

6. In the Video Event FX window, click the Transition Progress button. This opens the keyframe timeline for the transition.

7. Click the Curves button to enter curve editing mode.

8. Double-click the envelope line to add a point.

9. Drag the point to a new position around .60, or use the Transition Progress slider to adjust the point.

10. Add another point to the envelope line. Set this point to a value of 0.00.

11. To set the curve type for the curve after a point, right-click the point and choose the curve shape you want. If you select one of the Bèzier curve types, adjust the curve handles until you achieve the shape you want.

12. When you’re done, click in your timeline to place the cursor before your transition and play your project.

    You’ll see the transition start, speed up, reverse, and finally finish. You can add as many points to the envelope as you want to.

Removing a transition

1. Click the Transition Properties button on an event to display the Video Event FX window.

2. Click the Remove Selected Plug-In button to remove the current transition.

Converting a cut to a transition

When you have two video events that are inserted back-to-back with no transition (referred to as a cut), you can convert the cut to a transition by dragging a transition from the Transitions window and dropping it between the events.

You can also right-click between the two events, choose Transition from the shortcut menu, and choose a crossfade or transition type from the submenu.

One or both of the events will be extended so they overlap, allowing room for the transition. Use the Alignment drop-down list under the Cut-to-overlap conversion heading on the Editing tab of the Preferences dialog to determine where the transition is placed. For more information, see Editing Tab

NOTE There must be sufficient media on each side of the cut to accommodate the overlap time specified on the Editing tab of the Preferences dialog.

Converting a crossfade or transition to a cut

1. Click to position the cursor within the transition.

2. Hold Ctrl while pressing the / key on your numeric keypad.

   The transition is converted to a cut, using the Cut-to-overlap conversion settings on the Editing tab of the Preferences dialog to determine where the cut occurs. For more information, see Editing Tab